Industrial Revolutions is the amazing new film from street trials riding star Danny Macaskill. Filmed and edited for Channel 4 ‘s documentary Concrete Circus.

Industrial Revolutions sees Danny take his incredible bike skills into an industrial train yard and some derelict buildings.’ Filmed in the beautiful Scottish countryside Danny Macaskill’s latest film was directed by Stu Thomson (Cut Media/MTBcut) for Channel 4′s documentary Concrete Circus.

Shoreline has always been a big fan of Danny Macaskill video’s…Now we’re stoked to learn that he’s riding for Ten five bike shoes, because we’re also big fans of five ten. The Five ten Danny Macaskill shoes are coming soon.

The designers from Salomon have done it again, check out the BBR the most versital ski ever. Looks like a spoon, turns like a dream, in all conditions the BBR Rips. The fat area before the tip keeps the ski on top of the snow allowing you to ride higher and turn quicker.

POINTY STICKS WITH GRIPS!
These sticks are great for jibbing! Shorter than your dad’s poles, but still longer than your tall tee, it’s the lightest stick with the skinniest grip in the world!

+ STICK: Strong & super light 6,000 Series Aluminum
+ GRIP: Grippy bike bar wrap & super skinny for easy grabs
+ STRAP: Simple, functional Black & yellow webbing
+ BASKET: Small and round
+ TIP: Pointy!
Drag these sticks all over the mountain and through the park, then just lift them in the air and grab your skis with ease anytime you want.or don’t.

STICK: Strong and light 6,000 Series Aluminum
GRIP: Super grippy mtn bike-type grip, we’re smart!
STRAP: Wide supportive webbing with rad graphics
BASKET: Small and round
TIP: Pointy!
This long stick will help you stab snow from a distance with a grip that just won’t slip. Works on firm snow, and even deep snow!

+ STICK: Super strong & light weight, 7,000 Series Aluminum
+ GRIP: 3D textured rubber fits your glove. like a glove
+ STRAP: Wide, supportive high-quality leather detailing
+ BASKET: Interchangeable small & large powder baskets
+ TIP: Pointy

Yes, its true, lake Tahoe’s Number one Snowboard Shop, just got a shout out from Freeskier Magazine. Freeski magazine recognized Shoreline of Tahoe as the best freeride ski shop in South Lake Tahoe, they went on to talk about our great selection of twin tip skis, and expert advice. Wow this was a great surprise for us, we really try our best, to give the best service, and information to all who seek to improve their mountain experience. Skier or Snowboarder, we want to equip you with the gear that the Ski or snowboard industry has to offer. To us its like being the best match maker, a marriage of sorts. We listen to what our customers are saying, how they ski, where they ski, how often they ski, problems their having, and the direction they want to go with their skiing. We marry the skiers flesh and bones, to wood and metal so they can become one with their skis. This is how we became # 1 in both Skiing and snowboarding.

How to select the right snowboard

CAMBER PROFILE:
Selecting a snowboard can be a complex process. A rider looking to purchase a board needed to decide according to the shape – freestyle, freeride, all mountain, stiffness, length, waist size – important for big feet, and graphics of course. Now brands are adding a new dimension: camber profiles!
Some brands offer up to 5 different profiles: classical positive camber, camber for powder, reverse camber only in between the feet, reverse with flat base under the feet, and some hybrid camber to round it up. It’s sometime summarized as S, V, U W camber shapes. How do I choose a board now? The simple rule with reverse camber / rocker snowboards is that they make all areas of your riding easier because the boards are more forgiving. Powder floats higher, Park less edge contact and Freestyle disengage the edges quicker. When it comes to Freeride, camber / rocker can be less stable at high speeds due to its reduced edge contact.

In 1985 boards were all rocker, but classical positive camber became the standard simply because it just works better, then the original rocker designs.
Lib and Gnu call it Banana Technology. Their boards bow from the middle to the tip (there are variations between models). One feature that Lib Tech and Gnu also offer on all their Banana Technology designs, Magnetraction which is like a serrated edge to increase its edge ability to cut though hard pack and ice.
Burton, K2 and Ride call their version Rocker, the difference being that their boards are flat between the bindings and rise from the binding to the tip (there are variations between models).

LENGTH:
A quick starting point for board length is to have it reach somewhere between the tip of your chin and the top of your hairline when standing the board in front of you. The board you most enjoy riding, however, may not fall within that range. Typically, a jib board for rails and flatground tricks will be a little shorter. A board intended purely for powder riding or for high speed carving down groomed runs will be a little longer. Reverse camber boards in powder are easier to keep on top of the powder, so you can get away with a smaller board in powder. A heavier set person will often be better off with a little longer board, whereas a small framed person may end up happier on a shorter board.

FLEX:
Personal preference is a huge factor in the flex of the board you select. Stiffer boards are typically used for higher speeds, carving, or pipe riding. Softer boards are preferred for beginners. It is easier to initiate a turn with a softer board, while stiffer boards will hold an edge at a higher speed.

WAIST WIDTH:
The width of the board should be fit to your boot size and stance angles. Typically, boots size 12 (mens) and larger should be on a board designated as wide. For maximum response, a width that allows the toe and heel of the boot to sit up to an inch over the edge of the board is ideal. The combination of the curve of the boot sole and the rise from the binding baseplate will eliminate the possibility of heel or toe drag.

SHAPE:
Boards come in many shapes. This may not be obvious at a glance, but there are several possibilities. The most common shapes are twin and directional. A twin shaped board is one that is symmetrical tip and tail with sidecut that is the same at either end. Twin shaped boards are great for park and pipe riding, and are easier to ride switch (rear foot first). A directional board has a longer tail than nose and often has progressive sidecut, where the radius is not one consistent curve from tip to tail. Directional boards are more often used for freeriding.
There are also tapered, swallowtail, and other shapes.

TAPER:
Taper refers to the difference in width between tip and tail of the board. Tapered boards are ideal for powder because the narrower tail will sink more easily, allowing to nose of the board to stay at or above the surface. Tapered boards also work well for carving on groomed runs, but don’t work as well for riding switch.

STANCE OPTIONS:
If you like to ride with a really wide stance or a really narrow stance, then you will want to check the stance options on the board. All boards have inserts to attach the bindings to the board, and there will be a range of widths possible using those inserts. Besides width, there is also setback to consider. Many boards come with the inserts set back 1? or more from a centered stance, but the bindings can still be mounted on center. Conversely, for boards with the inserts centered on a board, bindings can still be mounted off center.

We Caught up with Mike Wilson at the Buckle up Big Air Event at Sierra at Tahoe, he rips it up an the NAS ski from lib Tech, Mervin manufacturing.

Lib Tech Nas Pow Magne Traction Ski

Lib Technologies NAS Freeride Alpine Ski is a great fatty ski for powder and ATV riding! With a 98mm-103mm underfoot (depends on length) you will definitely be able to float in the powder. These skis have a sick design and they are a twintip ski so you will not have a problem landing switch off of a huge cliff in the powder.

Lib Tech Nas Park No Surprise Ski

The Park Series skis are all sold as singles $300.00 for the right ski and $300.00 for the left ski, to further show how crazy Mike Olsen is, compared to his competitors. Three different top sheets are available and, like the other skis from Lib Tech, the Park Series incorporates the company’s signature Magne-Traction technology, which puts seven serrations in each edge, effectively looking like wiggles. These serration, each with a specific purpose, create a more catch-free tip and tail and better control for jumps and tricks.

Lib Tech NAS Pipe reCurve Ski

The Freeride Series skis are also sold as singles with various top sheets and feature the Magne-Traction technology. it’s wider under foot and longer in lengths the the park, the Magne-Traction technology edges help the ski hold on ice and give more stability for steeps and big-mountain adventures.

Lib Tech NAS Pow reCurve Ski

Mike Wilson, Jamie Pierre and the Lib Tech ExperiMENTAL division are proud to introduce the reCurve Magne-Traction, camber/rocker combination. reCurve NAS are designed to give you the float of rocker in the pow and crud and liveliness and performance edge hold of camber on hardpack and ice. The rockered tips pre initiate turns and integrate smoothly into the cambered body of the ski as it is pressed out into an arc during a turn. Shorter contact increases edgehold. The reCURVE rides short and agile on hardpack and floats long and easy in pow and crud.